Wedding with silicone ring design should pay attention to what,custom rubber keychains

Silicone products can be divided into three categories according to the different molding process. Molded silicone products are usually made by being put into the high temperature mold after the acustom rubber keychainsddition of curing agent in the solid silica gel through the curing machine pressure and high temperature into a solid. The shape of the mold determines the shape of the molded silicone products. Molded silicone products is currently the most widely used in the silicone industry. So as for silicone bracelets. Extruded silicone products are usually extruded through the extrusion of silicone molding. The general shape of the extruded silicone long and tubular which can be cut, but the shape of the extruded silicone has limitations. Liquid silicone products are made through the injection molding of silica gel. Because of its soft characteristic, widely used in the simulation of human organs.  

ccording to customer’s request for free. 2 make the mould The mould is made by the artwork that is confirmed by customer. A mould is made from copper usually. It is a necessary step to start production. 3 Color and rubber mixing This is the step to prepare the raw material of the bracelet.  We have to make the color as the pantone color customer wants. 4 weighing Commonly 5.5g per bracelet. 5 start production Set the mould on the machine and warm ucustom rubber keychainsp to needed tempreture. 15k pcs bracelets can be done in 1 day by 1 machine. 6 edge cutting Use the machine to cut the extra part of the bracelet and divice the bands made by one mould. 7 quality inspection The defective must be picked out before packing. 8 packing and dilivery The bulk packing is 100pcs/ bag, 2500pcs/ctn. There can be individually wrapped if customer request. We have the confirm the dilivery details before dispatching.  

yellow wristbands